MANTEC

The MANBO Roof Bar is a design collaboration between MANTEC & BOAB.

Specifically designed for our range of World Original Autohome Roof Tents and/or our OZTENT FOXWING Awnings.

Weighing in at just 4.2kg, The MANBO is a single sheet of steel, laser cut then folded into shape and overlap welded into place to give added strength.
It's then given MANTECs Land Rover approved Three Stage Powder Coating to add durability and good looks to this lightweight yet incredibly strong roof bar.

Hole spacings along the wide smooth top mounting surface is specific to our roof tents making fitting easier, quicker and safer using our M8 Mounting Bolts & Nyloc Nuts.

The MANBO will accept Small, medium & Large Roof Tents which can be placed Centrally or Off-Set slightly to the near or off side of the vehicle allowing space for camping or sporting goods or a FOXWING Awning.

Additional holes in the top of the bar (at each end) can be used for CB Antennas, Awning Lights, Lashing Eyes etc - or best of all the Standard FOXWING Brackets will mount directly into them!

The Two holes in the vertical mounting foot are also Specifically spaced to mount the FOXWING Awning directly to them via its' Strong Aluminium Back Plate.
Once in place on these mounting holes it's almost impossible to remove the FOXWING without removing the MANBO Roof Bars first, this in itself is also extremely difficult for a passing 'would be thief' as we can instal them with our Triangle Head Tamper Proof Bolts.

MANBO Roof bars are Priced Individually!

This model suits Land Rover Defender Only!

MANBO Bars are supplied with 2No - M8 x 20mm Allen Head Clamp Bolts

* Two Additional M8 x 20mm Tamper Proof Clamp Bolts can be supplied with each bar purchased if required.
Each order placed will receive a FREE Wrench to suit Tamper Proof Bolts.
See "Essentials" Page for more Information

*Two Additional M8 x 40mm Channel Fixing Bolts, for attaching Autohome Roof Tents, can be supplied with each bar purchased if required.

See "Essentials" Page for more Information

The MANBO Roof Bar is a design collaboration between MANTEC & BOAB.

Specifically designed for our range of World Original Autohome Roof Tents and//or our OZTENT FOXWING Awnings.

Weighing in at just 4.2kg, The MANBO is a single sheet of steel, laser cut then folded into shape and overlap welded into place to give added strength.
It's then given MANTECs Land Rover approved Three Stage Powder Coating to add durability and good looks to this lightweight yet incredibly strong roof bar.

Hole spacings along the wide smooth top mounting surface is specific to our roof tents making fitting easier, quicker and safer using our M8 Mounting Bolts & Nyloc Nuts.

The MANBO will accept Small, medium & Large Roof Tents which can be placed Centrally or Off-Set slightly to the near or off side of the vehicle allowing space for camping or sporting goods or a FOXWING Awning.

Additional holes in the top of the bar (at each end) can be used for CB Antennas, Awning Lights, Lashing Eyes etc - or best of all the Standard FOXWING Brackets will mount directly into them!

The Two holes in the vertical mounting foot are also Specifically spaced to mount the FOXWING Awning directly to them via its' Strong Aluminium Back Plate.
Once in place on these mounting holes it's almost impossible to remove the FOXWING without removing the MANBO Roof Bars first, this in itself is also extremely difficult for a passing 'would be thief' as we can instal them with our Triangle Head Tamper Proof Bolts.

MANBO Roof bars are Priced Individually!

This model suits Land Rover Defender Only!

MANBO Bars are supplied with 2No - M8 x 20mm Allen Head Clamp Bolts

* Two Additional M8 x 20mm Tamper Proof Clamp Bolts can be supplied with each bar purchased if required.
Each order placed will receive a FREE Wrench to suit Tamper Proof Bolts.
See "Essentials" Page for more information

*Two Additional M8 x 40mm Channel Fixing Bolts, for attaching Autohome Roof Tents, can be supplied with each bar purchased if required.

See "Essentials" Page for more Information

Based on the old military aluminium inter-lockable tracking Mantec Sand Tracks are 4mm high-grade aluminium and have been tried and tested over years of use in the Sahara Desert.

Standard dimensions are 1.53m x 470mm weighing 14kg per pair.

Mantec Raised Air Intake fits to the vehicle using the existing vent on the right hand side. To fit vehicles with 300tdi, TD5 and 2.4 transit puma engines. Not compatible with an external roll cage.